Beschreibung
Our Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, we’ve explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities.
Key Features:
– Our PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.
– Cooling jacket in the vertical walls offers efficient cooling without the hazzle of cleaning a spiral.
– Many options for connecting accessories like sensors, heaters, carb. stones and other accessories.
– Pressure rated for 2 bar / 30 PSI.
– 8″ TC port on top for easy access.
– 2″ TC dump and racking valves.
Our Unitanks are designed and manufactured with special attention to safety and quality.
They are tested and certified according to the requirements for PED 2014/68/EU by a third party.
Specifications:
| Low height w/o acc.: | 83 cm |
| Max height w/o acc.: | 103 cm |
| Packaging size: | 85 (h) x 52 (w) x 52 (d) cm |
| Net weight: | 38 Kg |
| Gross weight: | 44.6 Kg |
| Tank diameter (inside): | Ø40 cm |
| Gross volume: | 51 liter |
| Max rec. volume | 40 liter |
| Min rec. volume: | 20 liter |
| Volume, cone: | 12 liter |
| Material: | 1.5mm stainless steel (SS304) |
| Operating pressure: | 1.0 bar / 15 PSI |
| Max pressure: | 2.0 bar / 30 PSI |
In the box:
– Unitank with adjustable frame
– 1 pcs Analog pressure gauge, TC34mm
– 2 pcs Butterfly-valve, 2″
– 1 pcs Butterfly-valve, 34mm DN20
– 1 pcs Blow-off pipe
– 1 pcs Racking arm 2″
– 1 pcs TC elbow 90°, 2″
– 1 pcs Insulation jacket, black neoprene
– 1 pcs Sample valve, 34mm
– 1 pcs TC Adapter 8″-3″
– 1 pcs TC blind cap, 3″
– 1 pcs TC blind cap 2″
– 2 pcs TC blind cap 1.5″
– 3 pcs TC blind cap 34mm
– 2 pcs TC gasket 8″ lipped
– 2 pcs TC gasket 3″
– 2 pcs TC gasket 2″ 5-pack
– 1 pcs TC gasket 1.5″ 5-pack
– 3 pcs TC gasket 34mm 5-pack
– 1 pcs Tri Clamp 8″
– 1 pcs Tri Clamp 3″
– 5 pcs Tri Clamp 2″
– 2 pcs Tri Clamp 1.5″
– 10 pcs Tri Clamp 34mm
– 1 pcs TC tool
– 4 pcs M10 steel/rubber feet
– 1 pcs TC34mm safety valve (PRV, 2 bar)
– Necessary bolts and parts for assembly
Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2″ sight glass etc.
For more detailed information and user manual, please visit docs.brewtools.com
Note: Model in photo is a prototype. Minor changes and improvements may occcur.
